<?xml version="1.0" encoding="UTF-8"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!DOCTYPE document [
  <!ENTITY project SYSTEM "project.xml">
]>
<document url="cluster.html">

  &project;

  <properties>
    <title>The Cluster object</title>
  </properties>

<body>

<section name="Table of Contents">
<toc/>
</section>

<section name="Introduction">
  <p>
  The tomcat cluster implementation provides session replication, context attribute replication and
  cluster wide WAR file deployment.
  While the <code>Cluster</code> configuration is fairly complex, the default configuration will work
  for most people out of the box. </p><p>
  The Tomcat Cluster implementation is very extensible, and hence we have exposed a myriad of options,
  making the configuration seem like a lot, but don't lose faith, instead you have a tremendous control
  over what is going on.</p>
</section>
<section name="Security">

<p>The cluster implementation is written on the basis that a secure, trusted
network is used for all of the cluster related network traffic. It is not safe
to run a cluster on a insecure, untrusted network.</p>

<p>There are many options for providing a secure, trusted network for use by a
Tomcat cluster. These include:</p>
<ul>
  <li>private LAN</li>
  <li>a Virtual Private Network (VPN)</li>
  <li>IPSEC</li>
</ul>

<p>When correctly configured, the <a
href="cluster-interceptor.html#org.apache.catalina.tribes.group.interceptors.EncryptInterceptor_Attributes">EncryptInterceptor</a>
provides confidentiality and integrity protection but it does not protect
against all risks associated with running a Tomcat cluster on an untrusted
network, particularly DoS attacks.</p>

</section>
<section name="Engine vs Host placement">
  <p>
   You can place the <code>&lt;Cluster&gt;</code> element inside either the <code>&lt;Engine&gt;</code>
   container or the <code>&lt;Host&gt;</code> container.<br/>
   Placing it in the engine, means that you will support clustering in all virtual hosts of Tomcat,
   and share the messaging component. When you place the <code>&lt;Cluster&gt;</code> inside the <code>&lt;Engine&gt;</code>
   element, the cluster will append the host name of each session manager to the managers name so that two contexts with
   the same name but sitting inside two different hosts will be distinguishable.
  </p>
</section>
<section name="Context Attribute Replication">
  <p>To configure context attribute replication, simply do this by swapping out the context implementation
  used for your application context.</p>
  <source>&lt;Context className=&quot;org.apache.catalina.ha.context.ReplicatedContext&quot;/&gt;</source>
  <p>
    This context extends the Tomcat <code><a href="context.html">StandardContext</a></code>
    so all the options from the <a href="context.html">base implementation</a> are valid.
  </p>
</section>
<section name="Nested Components">
  <p><b><a href="cluster-manager.html">Manager</a>:</b> <br/>
    The session manager element identifies what kind of session manager is used in this cluster implementation.
    This manager configuration is identical to the one you would use in a regular <code><a href="context.html#Nested_Components">&lt;Context&gt;</a></code> configuration.
    <br/>The default value is the <code>org.apache.catalina.ha.session.DeltaManager</code> that is closely coupled with
    the <code>SimpleTcpCluster</code> implementation. Other managers like the <code>org.apache.catalina.ha.session.BackupManager</code>
    are/could be loosely coupled and don't rely on the <code>SimpleTcpCluster</code> for its data replication.
  </p>
  <p><b><a href="cluster-channel.html">Channel</a>:</b> <br/>
    The Channel and its sub components are all part of the IO layer
    for the cluster group, and is a module in it's own that we have nick named &quot;Tribes&quot;
    <br/>
    Any configuring and tuning of the network layer, the messaging and the membership logic
    will be done in the channel and its nested components.
    You can always find out more about <a href="../tribes/introduction.html">Apache Tribes</a>
  </p>
  <p><b><a href="cluster-valve.html">Valve</a>:</b> <br/>
    The Tomcat Cluster implementation uses <code>Tomcat <a href="valve.html">Valves</a></code> to
    track when requests enter and exit the servlet container. It uses these valves to be able to make
    intelligent decisions on when to replicate data, which is always at the end of a request.
  </p>
  <p><b><a href="cluster-deployer.html">Deployer</a>:</b> <br/>
    The Deployer component is the Tomcat Farm Deployer. It allows you to deploy and undeploy applications
    cluster wide.
  </p>
  <p><b><a href="cluster-listener.html">ClusterListener</a>:</b> <br/>
    ClusterListener's are used to track messages sent and received using the <code>SimpleTcpCluster</code>.
    If you wish to track messages, you can add a listener here, or you can add a valve to the channel object.
  </p>
</section>

<section name="Attributes">
  <subsection name="SimpleTcpCluster Attributes">
  <attributes>
    <attribute name="className" required="true">
      <p>The main cluster class, currently only one is available,
         <code>org.apache.catalina.ha.tcp.SimpleTcpCluster</code>
      </p>
    </attribute>
    <attribute name="channelSendOptions" required="true">
        <p>The Tribes channel send options. This option is used for all messages
        sent through the SimpleTcpCluster.</p>
        <p>The value may be specified either as an integer (add values to use
        multiple flags) or using a comma-separate list of the human-readable
        option names. Human-readable names are translated to their integer
        values on startup.</p>
        <p>The different values offer a tradeoff between throughput on the
        sending node and the reliability of replication should the sending or
        receiving node(s) fail.</p>
        <p>The supported values are:</p>
        <dl>
          <dt><code>byte_message</code>, <code>byte</code> or
              <code>1</code></dt>
          <dd>The message is a pure byte message and no marshaling or
              unmarshalling will be performed</dd>
          <dt><code>use_ack</code> or <code>2</code></dt>
          <dd>The message is sent and an ACK is received when the message has
              been received by the recipient. If no ack is received, the message
              is not considered successful.</dd>
          <dt><code>synchronized_ack</code>, <code>sync</code> or
              <code>4</code></dt>
          <dd>Has no effect unless <code>use_ack</code> is set. The message is
              sent and an ACK is received when the message has been received and
              processed by the recipient. If no ack is received, the message is
              not considered successful.</dd>
          <dt><code>asynchronous</code>, <code>async</code> or
              <code>8</code></dt>
          <dd>The message will be placed on a queue and sent by a separate
              thread. It is possible for update messages for a session to be
              processed by the receiving node in a different order to the order
              in which they were sent.</dd>
          <dt><code>secure</code> or <code>16</code></dt>
          <dd>Not implemented. Has no effect if used.</dd>
          <dt><code>udp</code> or <code>32</code></dt>
          <dd>The message will be sent using UDP instead of TCP.</dd>
          <dt><code>multicast</code> or <code>64</code></dt>
          <dd>Not implemented. Messages will not be sent if used.</dd>
        </dl>
        <p>The default value is <code>8</code> (<code>async</code>).</p>
    </attribute>
    <attribute name="channelStartOptions" required="false">
      <p>Sets the start and stop flags for the &lt;Channel&gt; object used by the cluster.
         The default is <code>Channel.DEFAULT</code> which starts all the channel services, such as
         sender, receiver, membership sender and membership receiver.
         The following flags are available today:</p>
         <source>Channel.DEFAULT = Channel.SND_RX_SEQ (1) |
                  Channel.SND_TX_SEQ (2) |
                  Channel.MBR_RX_SEQ (4) |
                  Channel.MBR_TX_SEQ (8);</source>
      <p>When using the static membership service
      <code>org.apache.catalina.tribes.membership.StaticMembershipService</code>
      you must ensure that this attribute is configured to use the default
      value.</p>
    </attribute>

    <attribute name="heartbeatBackgroundEnabled" required="false">
      <p>Flag whether invoke channel heartbeat at container background thread. Default value is false.
         Enable this flag don't forget to disable the channel heartbeat thread.
      </p>
    </attribute>

    <attribute name="notifyLifecycleListenerOnFailure" required="false">
      <p>Flag whether notify LifecycleListeners if all ClusterListener couldn't accept channel message.
         Default value is false.
      </p>
    </attribute>
  </attributes>
  </subsection>
</section>
</body>
</document>
