system-config-printer-common-1.5.7-187.2e>UASr?̏$;K?Wөeo1bQuwalju'/ uPiד\M><?d% + Y -L Ug^$^ ^ ^ ^ ^ ^h^>^@^0(8E9E:!YEFG^HT^I^X,Y0\<^]մ^^ bݨc8dޣeިfޭlޯu^v< wh^x^yXtz(8Csystem-config-printer-common1.5.7187.2A printer administration tool -- Common Filessystem-config-printer is a graphical user interface that allows the user to configure a CUPS print server. This package provides files common to various binaries.Wөbuild89KGNOME:Factory / openSUSE_PPCobs://build.opensuse.org/GNOMEGPL-2.0+Hardware/Printinghttp://cyberelk.net/tim/software/system-config-printer/linuxnoarchh<|< 9F2D@&shgJ,m*{ }$k| VUK#J+;e?DxWW OO | i_ 4#] |QFm X ~ 0  UA%d P; A큤큤큤A큤큤큤큤A큤큤A큤A큤WWWWܿWܽWWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWөWө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-config-printer-1.5.7-187.2.src.rpmsystem-config-printer-common@    @@@@@@@@@@@/usr/bin/python3dbus-1-python3python3-cairopython3-cupspython3-cupshelperspython3-gobjectpython3-gobject-Gdkpython3-smbcrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsLzma)typelib(GLib)typelib(GObject)typelib(Gdk)typelib(GdkPixbuf)typelib(GnomeKeyring)typelib(Gtk)typelib(Gtk)typelib(Notify)typelib(PackageKitGlib)typelib(Pango)typelib(Polkit)1.9.603.0.4-14.0-14.4.6-13.04.12.0.1W_WV@WQq@W,@W@WVKUAUL@UUUU @UUTC@TJ?@StSS1oR@R$R0@RZ@Q@QkQ@PN@P@PtP*=PkP H@OP@O.o@ONNN@N@Nf @NV9@NTN3@N"N@MMMӴMWL@Ls@L]JL4l@KK @K @KrKV@K2@K(Jw@J#J}hJyt@JhPJd\@I@I@I@dimstar@opensuse.orgalarrosa@suse.comdimstar@opensuse.orgalarrosa@suse.comalarrosa@suse.commgorse@suse.comdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgzaitor@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgsfalken@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgfcrozat@suse.comfcrozat@suse.comdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgcoolo@suse.comdimstar@opensuse.orgtittiatcoke@gmail.comdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgbadshah400@gmail.comvuntz@opensuse.orgvuntz@opensuse.orgdimstar@opensuse.orgbadshah400@gmail.comvuntz@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgvuntz@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgdimstar@opensuse.orgvuntz@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgdimstar@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgvuntz@opensuse.orgdimstar@opensuse.orgvuntz@novell.comvuntz@novell.comvuntz@novell.comvuntz@novell.comvuntz@novell.comvuntz@novell.comvuntz@novell.comvuntz@novell.com- Add Require python(3)?-gobject-Gdk: pygobject was further split in order to be able to install it without X-dependencies. We import Gdk from gi.repository, thus also require python-gobject-Gdk (boo#984252).- Modified python3-to-python2.diff : One of the changes included there now comes in fix_connect_dialog_focus.diff. - Create a python3-cupshelpers or python-cupshelpers package depending on the value of the use_python3 variable. - Require python3-cups or python-cups (and the associated python3-cupshelpers/python-cupshelpers) depending on the case. - Remove %py_requires: It's not really needed. - Merge the spec file from SLE12-SP2 and GNOME:Factory (bnc#983255).- Do not handle template service (configure-printer@) with the sytemd service_* macros (boo#982299). - Add rpmlintrc to silence the warnings about it.- Add fix_connect_dialog_focus.diff: Enable the focus on the text entry part of the combobox in the Connect Dialog. This way, users can edit its content and write the ip of the remote cups server to connect to (gh#twaugh/system-config-printer#38).- Add python3-to-python2.diff : Remove all python3 dependencies. - Modified python3 dependencies in the spec file too to use python2 in SLE12.- Update to GNOME 3.20 Fate#318572- Move system-config-printer to the main package where also the respective .desktop file is packaged.- Add system-config-printer-no-params-to-py3.patch: Do not launch udev-add-printer with invalid parameters (boo#942809).- Explicitly BuildRequire pkgconfig(udev): its existence is verified in configure.- Own %{_datadir}/appdata for openSUSE:42.- Update to version 1.5.7: + Test device ordering: hp beats dnssd and usb. + Fixes for appdata file. + Fixed traceback (lp#1213136). + Set use_underline=True for previously-stock buttons (lp#1210859). + Increase bus settle time for usb_modeswitch devices (lp#1206808).- Update to version 1.5.6: + Don't show traceback messages for missing probe helpers (lp#1194101). + Don't try writing bytecache when running udev-add-printer (lp#1196183). + Don't try decoding already-decoded Unicode (lp#1195974). + Fixes for CMD matching (lp#1177978, lp#1171874). + Fixed 'Apply' sensitivity when downloading driver. + Avoid deprecated things. + Handle missing 'functionality' field in returned data for driver. + Some fixes for the New Printer dialog. + Don't install an OpenPrinting driver if the license is not accepted.- Update to version 1.5.5: + Bugs fixed: lp#1176443, lp#1186475, lp#1181043, lp#1179590, lp#1171469, lp#1397750, lp#1167978, lp#1167978, lp#1167978. + Updated translations. - Add keyring and .sig file for gpg validation.- Fix system-config-printer-no-openprinting.patch: an indent of one block was lost in the last rebase. - Require python3-cups instead of cups directly: we require the bindings and never speak to cups directly (boo#922000). - Add python3-pycurl and python3-requests Requires: needed dependencies to start.- Update to version 1.5.4: + Updated aclocal.m4. + Included an AppData file. + Never set SMB Verify button sensitive without checking pysmb is available. + newprinter: fixed lock handling when OpenPrintingRequest is cancelled. + newprinter: Don't make installpackage errors completely silent. + PhysicalDevice: extract hostname from hp:/net/...?hostname= URIs (rh#1154686). + newprinter.py: If additional utilities are needed, do not try to install them twice. + Make recognition of HP MFPs with scan functionality actually work, instead of considering everything as HP scanner. + Check for both /etc/sane.d/dll.d/hpaio and /etc/sane.d/dll.d/hplip so that it works with both Red Hat and Ubuntu. + newprinter.py: Import installpackage so that PackageKit-based package installation actually works. + installpackage.py: Use D-Bus directly to communicate with PackageKit. + ppdcache: return exception rather than looping. + Removed empty translations. + timedops: Don't try to remove sources that are already removed. + Tell user how to retrieve journal entries as root (rh#1157253). + Fixed parsing of HPLIP fax type, as implicit conversion from string to int does not work anymore (lp#1369789). + Don't treat CUPS IPP conformance failure state reasons as errors. + Codec fix for AuthDialog.get_auth_info (rh#1060453). + Fix path for screenshots. + Added AppData screenshots. + Fixed physical device identification. + The cupshelpers.ppds.normalize() function is used first now. + jobviewer: alweys fetch auth-info-required attribute (lp#1380514). + Don't try installing smb backend a second time. + Show New Printer dialog immediately for printer_with_uri mode (rh#1158743). + monitor: another update timer handling issue. + Cancel deferred timer on quit (rh#1145388). + Moved appdata file back to top level. + Fixed Error Policy label content. + Changed GtkAlignment xalign/yalign properties to halign/valign on child. + Dropped xscale/yscale properties. + Dropped GtkViewport resize_mode property. + Converted GtkAlignment *_padding properties to GtkWidget margin_* equivalents. + Set orientation of some internal GtkBox widgets. + Changed GtkHBox/GtkVBox widgets to GtkBox. + Removed GtkAlignment widgets. + Refer to button label by id, not parentage. + jobviewer: tell monitor which printers to watch. + monitor: job-removed when moved out of watched set of printers. + jobviewer: React to button-press-event for Move To submenu (lp#1388601). + Catch IPPError when writing server settings (rh#1159584). - Changes from version 1.5.0: + Don't ask PackageKit to look for drivers for empty device IDs. + monitor: only run one timer at a time. + Don't fill the makes list after downloadable driver chosen. + OpenPrintingRequest object for grouping queries. + Use items() instead of iteritems() with Python 3 dicts. + Use items() instead of iteritems() in GroupPhysicalDevicesRequest's _group(). + Fix for automatically adding Bluetooth printers. + Memory leak fixes in udev-configure-printer. + Don't run gpk-install-package-name directly, use installpackage module. + Main window: don't try removing the populateList timer when not set. + monitor: don't try removing the update timer when not set. - Changes from version 1.4.7: + Use GLib.idle_add, not GObject.idle_add. + Take the gdk lock before entering gtk_main() (rh#1052203). + Definitive postscriptdriver.prov is in pycups. + More Python3 fixes.. + Fix LPD/LPR Probe (lp#1372213). + socket's send() takes bytes and recv() returns bytes. + Don't try nested classes, as CUPS forbids it (rh#1140627). + Moved DOWNLOADABLE_* config constants to config.py. - Changes from version 1.4.6: + Explicity use /usr/bin/python3. + Makefiles consistent for python3. + Consistent use of PYTHON env var in Makefile. + Python3 changes for pickle handling. + Keep device URI field updated. + Codec issue fixes. + Always show connections for new printers when it makes sense. + fix resolution for unicode URIs. + Always display error when unable to fetch PPD for remote printer (rh#1087052). + Use urlparse for decoding DNSSD URLs. + Python3 syntax fixes. + GUI: chain up to parent constructor. + Prevent printer-action menu items being incorrectly sensitive (rh#1124284). + dbus: reload PPDSs in FetchedPPDS safely. + dbus: rewrite openprinting search as async and call destroy on NP dialog. + Revert "Don't download OpenPrinting drivers in D-Bus service (rh#1052203). + Don't call Gtk.evengs_pending() in nextNPTab (rh#1052203). + Explicitly use /usr/bin/python3 in udev-add-printer (rh#1126149). + More robust argument handling in udev-configure-printer. + Use Gtk main loop in D-Bus service (rh#1116756). + Fixed type causing bluetooth queues not to be removed. + use subprocess.DEVNULL instead of std...=file(/dev/null,...). + Don't set subprocess's stdout to non-writable fd. + Fixed __cmp__ conversion to ruch comparisons (lp#1364196). - Adjusted BuildRequires for Python3 Port: + Removed: python-devel, python-xml, dbus-1-python, python-cairo, python-gobject, python-smbc. + Added: python3-devel, python3-lxml, dbus-1-python3, python3-cairo, python3-gobject, python3-smbc.- Update system-config-printer-no-openprinting.patch: do not crash when printing a traceback. As we disable openprinting, our status is always 403 and the noise of a traceback not welcome (boo#902407).- Use Adwaita-icon-theme on openSUSE 13.2 (GNOME 3.14): gnome-icon-theme merged the multiple subpackages and was renamed to adwaita-icon-theme. The presence of the icon is responsibility of GTK 3. + Conditional BuildRequires / icon location: - openSUSE > 13.1: adwaita. - openSUSE <= 13.1: gnome.- Update to version 1.4.5: + Some codec fixes. + Traceback fixes. + IPv6 address entry fix. + Auth info saving improvement. + Some loop/hang bug fixes. + Use LockButton for fewer auth dialogs. - Rebase system-config-printer-Gtk-introspect.patch.- Update to version 1.4.4: + Some UI fixes. + D-Bus signature decorator fix. + Job authentication fixes. + Makefile fixes. + Model names are now sorted by normalized name. - Add system-config-printer-no-applet-in-gnome.patch: do not start printer applet in GNOME (rh#677676).- Remove old python bindings dependencies which are replaced by gobject-introspection typelib ones: python-gnomekeyring, python-gtk, python-notify. - Add python-cairo as dependency, was pulled before by python-gtk.- Update to version 1.4.3: + Make GnomeKeyring integration work with GIR. + Fix module name when retrieving item from keyring. + Use correct key to determine if auth is required. + More debug output for the OpenPrinting database query module. + Assign the driver type "pdf" with higher priority than the driver type "exact-cmd". + Bugs fixed: lp##653132, lp##1220066, rh##1009865, rh##1018191, rh##1017561, rh#1004753, rh#1003219 + Updated translations.- Add system-config-printer-Gtk-introspect.patch: Require Gtk 3.0 typelibs. We know we can't use Gtk 2.0 (bnc#852450). - Require system-config-printer from -applet instead of only system-config-printer-common (bnc#852842).- Update to version 1.4.2: + Bugs fixed: rh#998277, rh#994506, rh#989096, rh#989050, rh#986939, rh#984284, rh#957733, rh#979119, rh#978970, rh#975705, rh#975058, rh#974845, rh#973662, rh#971973, rh#971404, rh#971548, rh#971459, rh#971417, rh#970646, rh#969846, rh#968142, rh#965771, rh#962207, rh#964673, rh#965678, rh#957444, rh#961882, rh#965678.- Update to version 1.4.1: + Make man page and --help output consistent. + Bugs fixed: rh#957343, rh#957444, rh#951710, rh#915483, rh#950162, rh#948240.- Update to version 1.4.0: + Support for firewalld. + Use gi.repository throughout. + Removed old bits (gtk_label_autowrap and gtkspinner). + Some locking fixes. - Drop system-config-printer-fix-name-of-udev-helper.patch: fixed upstream. - Rebase system-config-printer-no-openprinting.patch. - Add gobject-introspection BuildRequires: needed to get automatic typelib() requires.- Add system-config-printer-fix-name-of-udev-helper.patch to fix udev-configure-printer to be called at all.- Add python-pycurl Requires to python-cusphelpers subpackage, as pycurl is imported from cupshelpers/openprinting.py.- Ensure that the udev related files are installed in the correct path (/usr/lib/udev).- Update to version 1.3.12: + Fixed udev rules so a systemd service is created for the device + Cleaned up systemd service description. + udev: Allow remove to take the same format address. + Catch-all for gnomekeyring exceptions (bgo#859760). - Fix %post/%postun scripts to reference the new service name (and do not handle demo.service; an obvious copy/paste error).- Update to version 1.3.11: + Fixed most recent change in cupshelpers: The cupshelpers config module was not being imported.- Update to version 1.3.10: + Changed application name in desktop file + Use cups-config to determine serverbin directory + Improved sorting of device lists + Add "--show-jobs" command line option + Use hpcups instead of ps with HP LaserJet 12xx/13xx + Suppress misleading notifications (lp#855379) + PDF printer support + Various enhancements on udev-configure-printer. - Replace libudev-devel and libusb-compat-devel BuildRequires with pkgconfig(libusb-1.0), following upstreams change. - Add pkgconfig(libudev) BuildRequires: it was pulled in implicit before.- Pass --with-systemdsystemunitdir=%{_unitdir} to configure to have the systemd service files installed - Add systemd BuildRequires in order to have the %{_unitdir} macro defined - Drop xz BuildRequires, as it now comes for free with the build system.- Update to version 1.3.9: + Improved output from check-device-ids script. + Don't warn about changed cupsGetPPD3 behaviour in CUPS 1.5.3. + Avoid temporary file leaks. + Handle file disappearances when caching PPDs (rh#786232). + Fixed several debugprints (rh#785581). + Updated translations.- Update to version 1.3.8: + Use pycurl 'https' support for openprinting (CVE-2011-4405) + Really fix SMB probing in PrinterFinder. + Require newer pycups; drop compatibility code. + Don't penalise pxlmono now that rh#661814 is fixed in ghostscript-9.04 + Several fixes related to cups authentication. + Various other code changes. + Bugs fixed: rh#743446, rh#751610, rh#755913, bgo#757520, rh#772112, bnc#735322, lp#653132, lp#653132, lp#653132, lp#844976, lp#874445, lp#653132. + Updated translations. - Drop system-config-printer-subprocess-no-shell.patch: fixed upstream. - Rebase system-config-printer-no-openprinting.patch.- Fix coding errors caught by Stephen Shaw in system-config-printer-subprocess-no-shell.patch.- Add system-config-printer-subprocess-no-shell.patch: avoid escaping issues when running commands. Fix bnc#735322.- Add system-config-printer-no-openprinting.patch: this disables the feature where PPD drivers can be downloaded from OpenPrinting.org. See discussion in bnc#733542. As a side-effect, this fixes CVE-2011-4405.- Modified categories in .desktop file so that it is grouped with "System" applications in the desktop menus (bnc#714333)- Update to version 1.3.7: + Show private job attributes for "my jobs" (rh#742279). + Enable Test Page button when application/postscript is supported. + Some preferreddrivers.xml fixes (lp#855412). + Handle errors saving troubleshoot.txt (lp#789602). + Removed some stale code. + Make connections list more easily accessible (lp#842092). + Improved handling of remote CUPS queues via DNS-SD, and IPP devices. + Better display of CUPS servers from "Find Network Printer". + Fixed SMB method for printer finder. + Don't handle tooltips during mainloop recursion (rh#664044, rh#739734). + Fixed bold print of tab labels on option conflicts. + Preserve installable options on driver change. + Update printer properties dialog correctly when PPD changed. + Fixed typo triggered by private job attributes (lp#827573). + Marked some translatable strings that weren't (rh#734313).- Split the main subpackage in various smaller subpackages, to enable more fine-grained dependencies (gnome-control-center only needs the dbus service, and we don't want to force people to install the whole system-config-printer in that case): - Create common subpackage that contains files common to more than one subpackage. - Create applet subpackage that contains the notification icon monitoring printing stuff when the user is logged in. - Create dbus-service subpackage that contains the dbus service. - Rename lang subpackage to common-lang, so that it gets installed with the common subpackage. - Make all those subpackages depend on the common subpackage, for obvious reasons. - Add other dependencies between those subpackages: . Add applet subpackage Recommends to main subpackage: it makes sense to have the applet if the main tool is installed. . Add dbus-service subpackage Requires to applet subpackage: the applet relies on the dbus service to manage jobs. - Move dbus-1-python, python-cups, python-cupshelpers, python-gnomekeyring, python-gobject, python-gtk, python-notify, python-smbc Requires from main subpackage to common subpackage since all those python modules can be used by the various tools. + Remove unneeded dbus-1-x11 and desktop-file-utils Requires. + Add a system-config-printer-applet Recommends to udev-configure-printer: the udev tools create a notification for the user if the applet is installed. + Make python-cupshelpers noarch. + Move the com.redhat.PrinterDriversInstaller.conf dbus configuration file to python-cupshelpers, where it really belongs (since this is where the dbus server is implemented). + Drop support for openSUSE <= 11.1.- Update to version 1.3.6: + Allow entering @,?,=,& characters in Device URI text field (lp##826958). + IPPAuthConnection: avoid traceback (Ubuntu #828030). + Removed PackageKit client code in missingPackagesAndExecutables (lp#726938). + Properties dialog: make OK button sensitive even when no changes to save (lp#444280). + Updated translations.- Also provide icon of size 256x256 (bnc#713902)- Update to version 1.3.5: + Expose more things via D-Bus: driver selection, missing executables checking, and physical device grouping. + Bug fixes: - Fixed cupsFilter search in missing executables check. - Use PackageKit to resolve missing executable filenames to packages, instead of having a static mapping in the source code. - Fixed DNSSD hostname resolution. - Fixed firewall code to handle json errors when used with the older system-config-firewall D-Bus service. - Fixed LPD probing (rh#726383). - Use "hostname" instead of "IP address" when asking for names of browse servers (rh#726134).- Update to version 1.3.4: + udev: - Don't rely on retriggering printers; enumerate them from systemd instead. - Don't complain about missing/invalid device ID for devices we've already handled. + UI: - Removed unused Printer Groups feature. - Don't show "No printers configured" page if the printers are filtered in any way. - URL-quote URIs when using "Find Network Printer" (lp#808137). - Downloadable drivers: don't display printers for which there are no drivers (rh#668154). - Kerberos support for the SMB 'Verify' button (requires new enough pycups). - Removed IPP/HTTP device screen in favour of "Enter URI" (rh#685091). - Converted ComboBoxEntry widgets to Entry+EntryCompletion in NewPrinterWindow.ui. - Robustness in ppdsloader in the face of errors (lp#766818). - Changed Make/Model/State labels into GtkEntry widgets so contents are always fully selectable (rh#719217). - Convert iters to paths before comparing (rh#717062, lh#791690, trac#221). - Set translation domain in D-Bus service (lp#783967). - Ensure consistency in jobviewer if add_job fails (rh#693055, rh#632551). + Driver preferences: - Avoid PostScript for HP LaserJet 2100 Series (rh#710231). - Raised priority for SpliX driver (lp#793741). + Other: - Adjusted test code in asyncpk1.py so it doesn't look like a tempfile vulnerability. + Updated translations. - Add xz BuildRequires to be able to decompress the tar.xz source.- Move %{_sysconfdir}/cupshelpers/preferreddrivers.xml to python-cupshelpers subpackage as the file is from there. - Own %{_sysconfdir}/cupshelpers to fix build.- Remove python-gnome Requires as no modules from python-gnome are used. - Add missing python-gnomekeyring Requires. - Change python-gobject2 Requires to python-gobject, following the package renaming.- Update to version 1.3.3: + Main application: - Allow % character in SMB URI (lp#747400). - More error handling (lp#744783). - Avoid traceback if printer duplication fails (rh#694629). - Fixed off-by-one error in monitor. - Fixed printer renaming (lp#726954). + Printer Properties dialog: - Added PrinterModified D-Bus signal to printer properties interface. - More robustness for printer properties dialog when printer removed (lp#741987). + New Printer dialog: - Fixed PPDs loader when using CUPS remotely or when DBus not available (rh#693515). - Handle failure to load PPDs more gracefully (lp#742409). - Avoid traceback when cancelling New Printer dialog after failure. - Make sure everything is ready before handlers might be called (rh#689336). + Job Viewer: - Ensure consistency in jobviewer if add_job fails (rh#693055, rh#632551). - Be defensive against CUPS returning incorrect job IDs (lp#721051). + Other bits: - More uses of check-device-ids.py. - udev-configure-printer: be more defensive when parsing CUPS response (lp#760661). + Other bugs fixed: lp#733088, lp#748964, lp#759811, lp#777188. + Updated translations.- Update to version 1.3.2: + Main application: - rh#685098: Set connected state when connecting to server fails - Handle the situation where cupsd has died/restarted more gracefully. - Renamed ui/*.ui -> ui/*.glade again, fixing translations. + Printer Properties dialog: - lp#729966: Just hide Printer Properties dialog on delete-event - Extra job options: print-quality, printer-resolution, output-bin. - Automatically show horizontal scrollbar in job options screen - Ignore "output-mode-default" attribute as it is not settable. - Handle IPP_TAG_RESOLUTION types (requires pycups-1.9.55). - Don't traceback if option value cannot be handled. - rh#679103: Fixed traceback in options.py + New Printer dialog: - rh#685091: Handle URIs in Find Network Printer entry, and use 'Enter URI' instead of 'Other' - trac#213: Use "Do It Later" instead of "Cancel" for adjust firewall dialog - rh#680683: Fixed an instance where NewPrinterGUI might not have self.printers set - IPPHostname can contain colon (to specify port). - Fixed automatic driver installation when changing the driver. - Removed stale code left over from conversion to gobjects. - Ensure all uses of ppdsloader supply the Device ID. - Fixed some small typos in newprinter --help output. - rh#680288: Prevent traceback after 2nd drivers search dialog is cancelled + Driver handling: - Activated and fixed testing mode for device ID/driver association - Match HP-Fax2/3/... PPDs, as well as Ubuntu/Debian hpijs-ppds packages. - preferreddrivers.xml: Identify hpcups and hpijs fax PPDs. - Match native hpijs driver (drv:///hp/hpijs.drv/...) as hpijs. - Handle Ubuntu locations of hpcups.drv and hpijs.drv. - preferreddrivers.xml: match OpenPrinting gutenprint PPD names as gutenprint. - Removed DES field check altogether. - xmldriverprefs.test: show order more clearly. - Make xmldriverprefs.test() debugging optional. - More debugging during PPD selection. - Prefer foomatic PostScript drivers before PCL drivers (except foomatic-recommended ones). - Update to version 1.3.1: + Fixed traceback due to libsane-hpaio installation check. + Removed duplicate method definition. + Defer calls to populateList initiated by monitor. + firewall: fixed cache behaviour. + Fixed page sequence when adding a printer with an exactly-matching driver. - Update to version 1.3.0: + Only show maintenance buttons when capable (rh#658564). + Compare printer make/model names only by words and numbers (like they sound). + XML-based driver preference rules. + Don't use status icon when notification server supports persistence. + Fetch Device ID for existing device when changing PPD, allowing a more complete choice of drivers. + Include generic drivers as candidates whenever CMD field is available. + Show all ID-matched drivers when adding a new printer. + Speed-ups in cupshelpers.ppds.ppdMakeModelSplit. + PPDs: Use ppd-product values to add to make/model list. + Show number of processing / pending jobs (rh#606868). + PPDs are now cached, with support for If-Modified-Since. + Adjust the firewall for SMB browsing. + Start CUPS service if not already started (rh#577226). - Rebase system-config-printer-icon-brp-friendly.patch. - Drop system-config-printer-firewall-menu.patch: no longer needed. This means we can remove the gnome-patch-translation BuildRequires.- Call relevant macros in %post/%postun: + %desktop_database_post/postun because the package ships at least one desktop file. + %icon_theme_cache_post/postun because the package ships themed icons. - Pass %{?no_lang_C} to %find_lang so that english documentation can be packaged with the program, and not in the lang subpackage. - Change Requires of lang subpackage to Recommends, since the english documentation is not there anymore.- Update to version 1.2.5: + Do not accept some invalid characters in various entries. + Add examples of IPP URI to NewPrinterWindow (rh#575795). + Delete Bluetooth printer's queue when unpaired. + Create ~/.printer-groups.xml only when group is created. + Add CMD-field matching for PPDs (rh#630058). + Save name of PPD which matches best to the detected printer, not only make/model. + Mark more strings as translatable. + Fix some crashes. + Small improvements and fixes. + Updated translations.- Update to version 1.2.4: + udev helper: use CUPS defaults when connecting. + Blacklist certain printer state reasons (rh#520815). + Exclude dnssd backend from udev search. + Do not error out on missing firewall D-Bus service. + Prioritize HP's hpcups driver against HPIJS. + Improvements for setting up Bluetooth printers. + udev-configure-printer: Match usblp, libusb, HPLIP, and USB device file URIs. + Fill the queue list when clicking "Probe" in LPD printer setup screen. + Remove the ":9100" from discovered "socket://..." URIs. + Integration of the dnssd CUPS backend and assosiation of DNS-SD names and IPs. + When setting up a printer search for local drivers before searching the internet. + Access OpenPrinting via the web query API with redirect support. + Prioritize DNS-SD-based URIs against IP-based URIs. + On discovered network printers do not only cache make and model but also the device ID. + Fix recognition of remote CUPS queues when setting up an IPP queue. + Avoid connecting to cups twice in PPDsLoader. + Make udev-configure-printer work for Bluetooth. + rh#618357: Changed shebang in executables + Various other bug fixees. + Updated translations. - Rebase system-config-printer-icon-brp-friendly.patch- Clean up update to 1.2.3. - Force installation of udev rules and helpers in /lib/udev instead of /etc/udev, since the default is to put a binary in /etc/udev, which is wrong.- Update to version 1.2.3: + Add Bluetooth auto-config to udev-configure-printer. + Make sure automatically-created queues will work. + Don't add queues for Graphtec devices. + Use sysconfdir for udev rules. + UI improvements. + Bug fixes. + Updated translations - Changes from version 1.2.2: + Resolve DNS-SD hostnames for physical device comparison. + Handle connection failures to cups better. + UI improvements. + Bug fixes. + Updated translations - Changes from version 1.2.1: + Many improvements in check-device-ids. + Use cups-pk-helper method for canceling jobs. + Add 25%, 50% and 75% level markers in the inklevel widget. + Improve Firewall interaction (Fedora-specific). + Fix a few crashes. + Bug fixes. + Updated translations - Add glib2-devel BuildRequires. - Rebase system-config-printer-icon-brp-friendly.patch.- Update to version 1.2.0: + The my-default-printer application has been removed. + Printer drivers are automatically installed when possible. + The basic/advanced server settings dialogs have been merged. + PPDs are now fetched asynchronously. + The job viewer has seen many improvements. + Updated translations. - remove fixme regarding polkit-1: current configure would not even know about it. - Rebase system-config-printer-icon-brp-friendly.patch to apply without fuzz.- Update to version 1.1.93: + Display a warning when the wrong IEEE 1284 ID is detected + rh#566938: catch RuntimeError in statereason.py when cupsGetPPD2 fails + Removed HP and Kyocera IEEE 1284 Device ID hacks + Increased new printer notification timeout to 20 minutes. + Added simple program to check IEEE 1284 Device IDs against PPDs + Update translations.- Update to version 1.1.92: + system-config-printer: - Use stock 'add' icon for new-printer button (lp#394071) - Use gtk.STOCK_ instead of gtk- throughout - Avoid clearing selecting device settings when adding a printer - Update the PolicyKit code to use the correct signature for DeviceGet - ppsloader: avoid traceback - Set timeout for InstallPrinterDrivers D-Bus call + Updated translations.- Update to version 1.1.91: + system-config-printer: - Make it obvious when a printer is disabled. - Update 'Time submitted' column when clicking Refresh in job viewer. - Fixed traceback when renaming a printer. - Fixed async pycups fallback again. - Fixed statereason localization for raw queues (rh#558156). - Set model for LPD queue ComboEntry. - Only add current device to list when all devices found (rh#558524). - When retrying authentication as another user, forbid PolicyKit. - Use tooltips in jobs treeview. - Avoid non-zero page sizes in SpinButton adjustments. - Only show jobs for selected printers in job viewer. - Better error handling when renaming a printer (rh#561182). - Troubleshooter checks local SELinux file contexts. - Fixed drop-down list for connection dialog. - Avoid crash filling makes list when no make detected (rh#562520). - Fixed automatic driver assignment via applet. - Minor bugfixes and HIG fixes. + Updated translations.- Update to version 1.1.90: + system-config-printer: - Parse foomatic's special DRV Device ID field (rh#550108). - Driver selection fixes (rh#550075). - Remove my-default-printer application. - Handle cancelJob's optional purge_job parameter in PolicyKit1 backend. - Changed 'Clear job' to 'Delete job'. - Make sure the printer we added still exists before selecting it (rh#551436). - Set notification timeouts appropriately (rh#550829). - "Copy" action in context menu is now called "Duplicate". - Make sure there are enough ink level values (rh#541882). - Reinstated job completion notifications with better text. - Remove job attributes viewer tabs for jobs that have been purged. - Use asyncconn for canceling/deleting jobs. - Ability to retrieve job files which have been preserved. - Set D-Bus timeout when calling asynchronously. - Restore option values for serial device. - Fixed window modality and transience. - PrinterDriversInstaller implementation: this is a system bus service to install drivers via PackageKit. - Use asyncconn to fetch PPDs. - Don't rely on cups-pk-helper being around (rh#556170). - Make sure serial device widgets are always initialized (rh#556488). - Clean up temporary files when localizing statereason (rh#552768). - Removed support for installing HP's proprietary plug-in. - Fix various tracebacks (rh#550442, rh#550437, rh#553141, rh#554372, rh#554268, rh#555552). - Avoid leaking resources. - Code cleanups. - Updated translations. + udev-configure-printer/udev-add-printer: - avoid traceback when no CMD field present. - try to install drivers first. - Update system-config-printer-icon-brp-friendly.patch after my-default-printer removal. - Remove system-config-printer-hide-my-default-printer.patch: my-default-printer was removed.- Update to version 1.1.16: + system-config-printer: - Don't fail if smbc module is not available. - Don't overwrite BrowsePoll settings with basic settings dialog (rh #543986). - Fixed cupsd.conf parsing when lines begin with blanks (rh#544003). - Constraints handling fix. - Clear device screen each time a new dialog is presented. - Prefer Foomatic/hpijs to hpcups for the time being. - Rearchitecture code for more asynchronous code, and use it to fetch the device list in a safe way. - Adapted to new pycups API for cupsSetPasswordCB2. - Ignore com.apple.print.recoverable state reason. - Fix various tracebacks. + Updated translations.- Update to version 1.1.15: + system-config-printer: - Fix a traceback. - Don't update properties if apply failed (rh#542503). - Changes from version 1.1.14: + system-config-printer: - Avoid unnecessary "publish printers" dialog. - Translate job-hold-until and retry-current-job values. - Attempt to discover whether the firewall needs adjusting. - Iconify jobs window into status icon. - Handle hpcups driver for 5400 series in test suite. - Added SMB support to 'Find Network Printer'. - Fixed device fetch when not using polkit-1. - Cancel PrinterFinder when new-printer dialog closes. - Added IPP and JetDirect support to 'Find Network Printer'. - Use the correct URI for probed CUPS queues. - Better order for network printer probes. - Use make-and-model to guess the PPD driver for a discovered printer, if no device ID is available. - Improve default name of printer, when the name already exists. - Auto-select raw queue correctly when changing PPD. - Attempt to determine make and model of network printers (rh#524321). - Don't display properties dialog for first test page (lp#444280). - Fixed visibility tracking for jobs window. - Strip 'zjs', 'zxs', 'pcl3' from make-and-model (rh#531048). - Added support for custom state reasons. - Catch IPP errors when updating from notified events (rh#530641). - Fail nicely if new printer is deleted during test page prompt (rh#533109). - Suggest installing foomatic-db-ppds when appropriate. - Install the foomatic package if foomatic-rip is missing. - Retry when reconnection (due to authentication) fails (rh#541741). - Various small bug and UI fixes. - Various code improvements. - Fix various tracebacks. + udev-configure-printer/udev-add-printer: - Build system fixes.- Update to version 1.1.13: + system-config-printer: - Use correct statereason level icon names. - Handle icon load failure gracefully. - Fix cleaning of TurboPrint PPD listings of CUPS 1.4.x. - Avoid error dialog after cancelling operation via PolicyKit dialog. - Fetch devices in a separate thread to avoid blocking (lp#516787). - Add polkit-1 support, and make it conditional on "configure - -with-polkit-1". - Fixed traceback with older versions of GTK+. - Fixed proxy authentication. - Allow PPD/device changes for raw queues. - Extended TimedOperation class to allow callbacks - Fixed cupspk support for DevicesGet - Allow parameters to cupshelpers.getDevices - Allow for more than one spinner task - Use callbacks when fetching devices - Fixed spinner UI bug - Fixed cancellation in TimedOperation class - Fetch network devices as soon as local devices are received - Make sure to cancel the fetchDevices callback when not needed + Updated translations. - Rebase system-config-printer-firewall-menu.patch to apply with fuzz=0.- Update to version 1.1.12: + system-config-printer: - Don't get tripped up by "-" when checking for missing executables. - HP's Bluetooth printers return a model name with added "_BT" in their device ID. - Added support for localized marker names - Fixed parenting of WaitWindow when adding printer. - Don't attempt to use PolicyKit if we are root. - Support for cups-pk-helper's DevicesGet method. - Use modern gtk tooltip support. - Fixed typo handling exceptions from AdvancedServerSettingsDialog. - Use set_default_size instead of setting width and height properties. - Fixed missing treeview update in properties dialog. - Fixed identification of CUPS native gutenprint drivers. - Prefer native CUPS drivers to foomatic drivers. - Busy/ready cursor handling fixes. - Use separate thread for verifying IPP queue. - Set an appropriate status icon tooltip when configuring printer. - Fixed cupspk handling of disabling a printer. - Show a 'paused' emblem for disabled printers. - Use preferred object path for AuthenticationAgent. - Kill job creation times timer on the jobviewer is destroyed. - Only update job creation times once per minute at rest. - Job status icon and state reason in jobs treeview. - Show rejecting printers as insensitive. - Added experimental package tagging for PPD files. - Removed notification when job has completed. - Fixed applet traceback when printing test page. - Don't allow Back/Forward to lose troubleshooting diagnostic information. - Code cleanups. + udev-configure-printer/udev-add-printer: - Compare MFG and MDL case-insensitively. + Updated translations.- Update to version 1.1.11: + udev-configure-printer/udev-add-printer: - don't add fax queue if already present - don't fork if DEBUG environment variable set - Enable/disable queues with paired device URIs - use '/' as delimiter when examining device URI - make sure we don't configure the same printer twice - Don't set USB configuration in udev-configure-printer - Serialize CUPS-Get-Devices requests - Exit early in udev-configure-printer if device already mapped to URIs - don't require pycups 1.9.46 just yet - Fixed name uniqueness checking - Notify the correct printer name - create fax queues using prefix of printer queue - fixed duplicate devpath check - fixed removal when cupsd not running + system-config-printer: - Use case-insensitive matching when cleaning up the PPD nick names to get the model names for the make/model/driver list - Made extracting make and model from the NickName of TurboPrint PPDs working again - Made the field for freely typing in an URI actually work - Better method of determining current device URI - Printer icon should not show 'printing' when job stopped - Updates for hplip 3.9.6 - Let the checks for adding a device to a physicaldevice object parse HPLIP URIs correctly to extract the host name/IP from them - jobviewer: notice jobs that have stopped due to backend errors - Fixed cupspk's implementation of adminGetServerSettings() - A warning is given that renaming destroys print job history - Small improvements for printer rename confirmation - API improvement in cupshelpers: limit job fetches - troubleshoot: treat http and https schemes as potential CUPS servers - Make properties dialog OK button insensitive when no changes - Validate BrowsePoll entries + Code cleanups and plug leaks. + Updated translations.- Fix build on 11.1 and earlier: we don't want the udev helpers there.- Update to version 1.1.10: + Support for HPLIP 3.9.6. + Fixed 'location' field for printers added remotely. + Avoid traceback when adding new printer. + Parse nmblookup failures correctly. + Avoid non-fatal traceback when adding IPP printer. + Make sure we find https URIs from https backend. + Prevent traceback on IPP notification after properties dialog cancelled. + Fixed incorrect authentication in the troubleshooter. + Arrows for adding and removing class members are sensitive only if something is selected. + Small fix for class members arrows: always de-sensitise buttons after use. + Another fix for selecting an added printer. + Spot stopped jobs with CUPS 1.4 as well. + Map gutenprint filenames to the package name. + Use gpk-install-package-name to install packages, not the PK D-Bus API. + Always update the jobviewer status icon on job events. + Fixed UI oddities when changing PPD/device. + Avoid possible traceback when receiving printer-added-events. + Fixed initial radio button selection for SMB authentication. + Make sure to URL-encode usernames and passwords correctly. + Don't run Properties dialog on new printer. + Don't mention the job number in completed jobs notification. + Check exit codes for child processes. + Removed IPP browser. + Improved matching of printer model names. + Added PIXMA comment to test suite. + Efficiency fixes for PPDs Device ID matching. + Fixed --debug option for PPDs self-test function. + Efficiency and readability improvements in PPDs Device ID matcher. + Avoid cups.setServer/setPort. + Fixed incorrect "printer not shared on server" message. + Drop libsexy support in favour of GTK+ 2.17's equivalent. + Avoid reloading all PPDs when calls to jockey fail. + Small speed-up (0.09s) for the case where jockey is not present. + Don't reload all PPDs if the query has already finished. + 75% speed improvement in ppdMakeModelSplit(). + New udev-based queue configuration system. + Improve window size. + Fixed hang on start-up when trying to resize the window. + Fixed tracebacks in cupshelpers.ppds test suite. + Fixed Device ID matching for HPLIP PPDs. + Updated translations. - Add cups-devel, libudev-devel, libusb-compat-devel BuildRequires. - Pass --with-udev-rules to configure. - Package the udev helpers in udev-configure-printer. This package Obsoletes cups-autoconfig, since the new udev helpers now do this job. - Split cupshelpers python module in python-cupshelpers package since it's needed by udev-configure-printer. - Drop system-config-printer-cups-autoconfig-notifications.patch: we will now use the udev tool and we will receive notifications without this patch.- Update to version 1.1.8 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Set relaxed PPD conformance + Fixed URI parsing when verifying IPP URIs + Set glade's textdomain in the jobviewer (lp#341765) + Made hp-plugin call also working with HPLIP 3.9.2 + Adjusted border padding for New Printer window + Use ValueError in PhysicalDevice to indicate device is different + Import debugprint in cupspk + Fixes on automatic printer model selection and suggestion of queue name + Style and efficiency improvements + Fixed XmlHelper crash on invalid XML file (lp#370469) + Clean up temporary PPD files when we're finished with them + Reconnect to CUPS if the connection gets lost during the installation of a driver from OpenPrinting + Scroll to new job if it was added just above the visible range + Use grey ink-drop when there is no marker-colors value + Fixed conversion from broken-down UTC time to simple UNIX time for held jobs + Track printer state changes for the printer context menu + Removed some stale code in cupshelpers + Make sure the job context menu cannot get out of date + Select a newly-added printer + Make troubleshooter work again by disabling cupspk for it- Update to version 1.1.7 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Prevent some tracebacks + Various improvements for printer model identification + Added support for https device URIs showing the IPP screen + Efficiency fixes + Do not use setlocale() for locale-independent uppercase/lowercase conversion + jobviewer: don't abort if we couldn't show a notification- Update to version 1.1.6 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + Use setlocale() to save current LC_CTYPE value, not getlocale() + Don't try search for a model series if there are no digits in the model name + Adapted D-Bus policy file to the new D-Bus defaults + Better PPD fallback searching. + Strip " hpijs" from PPD names.- Update to version 1.1.5 (this is not a complete list of changes since upstream uses git, but some changes aren't listed in ChangeLog): + UI improvements in the new printer dialog. + Include local printer attributes in diagnostic output. - Drop system-config-printer-bnc456110-non-blocking-probe.patch: fixed upstream. - Drop system-config-printer-fix-add-printer-git051bc7f0.patch: fixed upstream.build89 1473489310  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^1.5.7-187.2   system-config-printer.pngsystem-config-printer.pngsystem-config-printer.pngsystem-config-printer.pngsystem-config-printer.pngsystem-config-printer.pngsystem-config-printerHIG.pyOpenPrintingRequest.pyPhysicalDevice.pySearchCriterion.pyToolbarSearchEntry.pyapplet.pyasyncconn.pyasyncipp.pyasyncpk1.pyauthconn.pycheck-device-ids.pyconfig.pycupspk.pydebug.pydnssdresolve.pyerrordialogs.pyfirewallsettings.pygtkinklevel.pygui.pyiconsi-network-printer.pnginstall-printerdriver.pyinstallpackage.pyjobviewer.pykilltimer.pymonitor.pynewprinter.pyoptions.pyoptionwidgets.pyppdcache.pyppdippstr.pyppdsloader.pyprinterproperties.pyprobe_printer.pypysmb.pyscp-dbus-service.pyserversettings.pysmburi.pystatereason.pysystem-config-printer.pytimedops.pytroubleshootCheckLocalServerPublishing.pyCheckNetworkServerSanity.pyCheckPPDSanity.pyCheckPrinterSanity.pyCheckSELinux.pyCheckUSBPermissions.pyChooseNetworkPrinter.pyChoosePrinter.pyDeviceListed.pyErrorLogCheckpoint.pyErrorLogFetch.pyErrorLogParse.pyLocalOrRemote.pyLocale.pyNetworkCUPSPrinterShared.pyPrintTestPage.pyPrinterStateReasons.pyQueueNotEnabled.pyQueueRejectingJobs.pyRemoteAddress.pySchedulerNotRunning.pyServerFirewalled.pyShrug.pyVerifyPackages.pyWelcome.py__init__.pybase.pyuiAboutDialog.uiConnectDialog.uiConnectingDialog.uiInstallDialog.uiJobsWindow.uiNewPrinterName.uiNewPrinterWindow.uiPrinterPropertiesDialog.uiPrintersWindow.uiSMBBrowseDialog.uiServerSettingsDialog.uiWaitWindow.uistatusicon_popupmenu.uiuserdefault.pyxmlpreferreddrivers.rngvalidate.py/usr/share/icons/hicolor/16x16/apps//usr/share/icons/hicolor/22x22/apps//usr/share/icons/hicolor/24x24/apps//usr/share/icons/hicolor/256x256/apps//usr/share/icons/hicolor/32x32/apps//usr/share/icons/hicolor/48x48/apps//usr/share//usr/share/system-config-printer//usr/share/system-config-printer/icons//usr/share/system-config-printer/troubleshoot//usr/share/system-config-printer/ui//usr/share/system-config-printer/xml/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -gobs://build.opensuse.org/GNOME:Factory/openSUSE_PPC/0532b4644fbb32f8d1554c912ba14a96-system-config-printerdrpmlzma5ppc64le-suse-linux       PNG image data, 16 x 16, 8-bit colormap, non-interlacedPNG image data, 22 x 22, 8-bit/color RGBA, non-interlacedPNG image data, 24 x 24, 8-bit/color RGBA, non-interlacedPNG image data, 256 x 256, 8-bit/color RGBA, non-interlacedPNG image data, 32 x 32, 8-bit/color RGBA, non-interlacedPNG image data, 48 x 48, 8-bit/color RGBA, non-interlaceddirectoryASCII textPython script, ASCII text executableC++ source, ASCII textXML 1.0 document, UTF-8 Unicode textXML 1.0 document, ASCII textXML 1.0 document, UTF-8 Unicode text, with very long lines  !)*,01268;?AFHPTUVWXY[]_`abcghijklmnorsR R R R RR R RRR R R R RR RR R R RRR R RR RR R RR RRR RR R R R RRRR R R R RR R RRR R RR R RRR R R RR R RRR R R RRR RRR R RR R RRR R R RRRRRRRR RR RR RRRRR R RRRRRRRRRRR RRRR_DŽYOcups-pk-helpersystem-config-printer-common-langudev-configure-printer?@]"k%ꆏ V;4ٍxΊ]P.:@1wy |jnMZɂ[ Is1vRJ=0ER:aRBHmѦN B9 SyimEv \bi?"іQr`E֭REO`[sfE¯&6p"խƦb ,0VC\%>soG1vQs՟bk%,!aD=ధ}h_>U#OQYX#H[b&|+,[Iol2-ҁ%p^ovrƝ)jRH" ' HH6oʙ@!_d&!Nv&yB~GF4Eely|ٟn"=Tng.uC!8{h